Preparation of carbon fibers/carbon/alumina tubular composite membranes and their applications in treating Cu-CMP wastewater by a novel electrochemical process

In this study, the alumina substrate was first prepared by the extrusion method, then followed by poly-vinylydenchloride (PVDC) film wrapping, PVDC carbonization, catalyst precursor coating, and the chemical vapor deposition (CVD) process to grow carbon fibers on the carbon interlayer. The carbon fibers/carbon/alumina tubular composite membranes (CCA-TCMs) thus obtained, with a pore size distribution ranging from 2 to 10 nm, were further characterized by scanning electron microscopy, transmission electron microscopy, and permporometry. A prepared CCA-TCM of this kind was incorporated into a novel simultaneous crossflow electrocoagulation and electrofiltration (EC/EF) treatment module to evaluate its capability in treating Cu-CMP (chemical mechanical polishing) wastewater. Crossflow EC/EF performance tests were carried out based on the 2³⁻¹ fractional factorial design using the electric field strength, crossflow velocity, and transmembrane pressure (TMP) as the experimental factors. Under the optimal operating conditions, the CCA-TCM associated EC/EF treatment module is capable of treating Cu-CMP wastewater in a proper manner. Permeate thus obtained had a turbidity of below 1 NTU and the removal efficiencies of total solids content, total organic carbon, copper, and silicon for Cu-CMP wastewater were 72%, 81%, 92%, and 87%, respectively.     

Dilute-and-shoot approach for determination of several biomarkers and pharmaceuticals in wastewater using nanoflow liquid chromatography – Orbitrap mass spectrometry

A new method for quantitative analysis of several biomarkers and pharmaceutical compounds in wastewater has been developed employing nanoflow liquid chromatography with Orbitrap mass spectrometry. An easy dilute-and-shoot approach has been used for sample preparation with a dilution factor of 5. Improved retention of ionic and highly polar compounds has been achieved by the addition of tetrabutylammonium bromide as an ion pair reagent into the final diluted sample. The new nanoflow liquid chromatography method has demonstrated low matrix effects (70%–111%), high sensitivity in terms of limits of quantification (0.005 to 0.3 μg/L), low injection volume (70 nl) and solvent consumption, and the ability to analyze diverse polar and ionic analytes within one run using a single reversed-phase nanoflow liquid chromatography column. Wastewater samples (n = 116) from the wastewater treatment plants of different cities in Latvia were analyzed using the developed method. The observed concentrations of biomarkers were in line with the literature data.     

Production of polyhydroxyalkanoate from sesame seed wastewater by sequencing batch reactor cultivation process of Haloferax mediterranei

Due to the high cost of bioplastic production, sesame wastewater, generated from the sesame seed hulling process, was investigated to be used as inexpensive and renewable carbon source for the production of biodegradable polyhydroxyalkanoate (PHA) by extreme Haloferax mediterranei. The sesame wastewater (SWW) was hydrolyzed using different concentrations of hydrochloric acid (0.4. 1.00 and 2.00 M) at different period of times (15, 60 and 90 min). The concentration of salt (NaCl) and nitrogen source (NH₄Cl and yeast) required for H. mediterranei cells growth and the accumulation of PHA biopolymer was optimized. A maximum 0.53 g/L concentration of PHA was achieved when the SWW extract media was supplemented with 100 g/L NaCl and 6.0 g/L yeast extract. The cultivation was scaled-up using sequencing batch reactor (SBR) fermentation under non-sterile conditions. The SBR results showed that SWW needs an auxiliary carbon source to obtain high PHA production. Consequently, the system fed with SWW and glucose produced higher PHA (20.9 g/L) than the system fed with SWW.     

Adsorption Kinetics,Equilibrium, and Thermodynamics of Copper From Aqueous Solutions using Silicon Carbide Derived from Rice Waste

Adsorption of Cu(II) from aqueous solution on a novel adsorbent, silicon carbide ash (SiC ash), was studied using batch technique. The adsorbent was prepared by pyrolysis of Egyptian rice waste (rice straw and rice husk) and was characterized by scanning electron microscopy (SEM), energy-dispersive x-ray (EDX), Fourier-transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD), and surface area analysis by Brunauer-Emmett-Teller (BET) Theory. The influence of pH, contact time, initial Cu(II) concentration, adsorbent dose, agitation speed, and temperature was investigated. Adsorption kinetics was analyzed using the pseudo-first-order, the pseudo-second-order, and intraparticular diffusion model. The adsorption process was found to follow a pseudo-second-order rate mechanism. The adsorption isotherm data could be well described by the Langmuir and Freundlich than the Dubinin–Radushkevich adsorption model. The adsorption capacity of 22.06 mg g^?1for SiC ash was obtained at pH = 5 and temperature of 298 K. Thermodynamic parameters, change in the free energy (ΔG°), the enthalpy (ΔH°), and the entropy (ΔS°), were also calculated. The overall adsorption process was exothermic, spontaneous in nature, and proceeds with decreased randomness as the entropy is negative value. Adsorption process was successfully applied to remove Cu(II) from an industrial wastewater sample.     

电化学法改性阳极对MFC性能的影响

采用不同质量分数的NH_4NO_3和(NH_4)_2S_2O_8溶液作为电解液,对双室微生物燃料电池的阳极炭布进行改性。以餐厨废水作为阳极底物,以K_3[Fe(CN)_6]和NaCl混合溶液为阴极液,考察不同电解液改性阳极条件下微生物燃料电池的产电性能及污水处理效果。结果表明,采用NH_4NO_3或(NH_4)_2S_2O_8改性炭布作为阳极的微生物燃料电池的发电性能和水处理效果均有改善。其中,采用质量分数为4%的(NH_4)_2S_2O_8溶液作为阳极改性电解液时,微生物燃料电池系统的产电性能达到最佳,其稳态电流密度约为60 m A/m~2,COD去除率约为42.5%。     

Studies on the removal of As(III) and As(V) through their adsorption onto granular activated carbon/MnFe2O4 composite: isotherm studies and error analysis

The granular activated carbon/MnFe₂O₄ composite with a mass ratio of 2:1 was synthesized using a simple chemical coprecipitation procedure and used for the removal of As(III) and As(V) from synthetically prepared wastewater. Physicochemical analysis of the composite was carried out through Brunauer, Emmett and Teller surface area and total pore volume, Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Micrograph and Energy-Dispersive X-Ray Spectroscopy (SEM-EDX). The impact of various adsorption parameters such as the initial pH, adsorbent dose, contact time, temperature and initial arsenic concentration were systematically investigated to evaluate the optimum operating conditions. Nonlinear regression analysis was employed to identify the best-fit isotherm on the basis of three correlation coefficients and three error functions and also to predict the parameters involved in one one-parameter, six two-parameter, nineteen three-parameter, three four-parameter and one five-parameter isotherms. The maximum adsorption capacities estimated using the Langmuir model were 1253 mg/g for As(III) and 1314 mg/g for As(V) at 30 °C temperature and 70 min contact time. The results showed that As(III) and As(V) removal was strongly pH-dependent with an optimum pH value of 7.0 and 4.0, respectively. The mean adsorption energy (E) calculated from the D–R model indicated the nature of adsorption being ion exchange type.     

快速消解分光光度法测定高氯废水中低浓度化学需氧量

建立快速消解分光光度法检测高氯废水中低浓度化学需氧量(COD)的方法。通过提高催化液中硫酸银的浓度(46 g/L)充分络合氯离子,同时降低消解液中重铬酸钾的浓度至0.061 2 mol/L来抑制重铬酸钾与氯离子的反应,达到有效消除Cl~–干扰的目的。水样在165℃消解30 min,于600 nm波长检测吸光度,标准曲线法计算COD。实验结果表明,水样中COD质量浓度为20 mg/L时,2 000 mg/L的Cl~–不干扰COD的测定(相对误差小于10%),并且随着COD质量浓度的增加,Cl~–产生的干扰误差逐渐降低。对国家环境保护部标准样品进行了测定,COD测定值与标准值一致。样品加标回收率为97.0%~103.7%,测定结果的相对标准偏差为2.01%~6.33%(n=6)。该法快速,有毒试剂用量小,成本低,具有较高的准确度和良好的精密度,可以用于多数工业废水中COD的测定。     

Influence of temperature on performance of an anaerobic sequencing biofilm batch reactor with circulation applied to treatment of low-strength wastewater

The effect of temperature on the performance of an anaerobic sequencing biofilm batch reactor (ASBBR) with liquid-phase recirculation was assessed. Assays were performed using a recirculation velocity of 0.20 cm/s, 8-h cycles, and an average treated synthetic wastewater volume of 2 L/cycle with a concentration of 500 mg of Chemical Oxygen Demand (COD)/L. Operation temperatures were 15, 20, 25, 30, and 35°C. At 25, 30, and 35°C, organic matter removal efficiencies for filtered samples ranged from 81 to 83%. At lower temperatures, namely 15 and 20°C, removal efficiency decreased significantly to 61 and 65%, respectively. A first-order model could be fitted to the experimental concentration profile values. The first-order kinetic parameter value of this model varied from 0.46 to 0.81 h¹ considering the lowest and highest temperature studied. Moreover, analysis of the removal profile values allowed fitting of an Arrhenius-type equation with an activation energy of 5715 cal/mol.     

Removal of pharmaceutical residues in a pilot wastewater treatment plant

Concern is growing over the contamination of the environment with pharmaceutical residues, among which non-steroidal anti-inflammatory drugs (NSAIDs) are one of the most abundant groups. Their widespread appearance in the aquatic environment is because of their high consumption and their incomplete removal during wastewater treatment. Because effective operation of wastewater-treatment plants is important for minimising the release of xenobiotic compounds, for example pharmaceutical products, into the aquatic environment, our study focuses on removal of commonly used NSAIDs (ibuprofen, naproxen, ketoprofen, diclofenac) and clofibric acid in a specially designed small-scale pilot wastewater treatment plant (PWWTP). This study shows that, except for diclofenac, steady-rate removal of NSAIDs over a two-year monitoring period has been achieved. Elimination of the compounds in the PWWTP was ≥87% for ibuprofen, naproxen and ketoprofen but only 49–59% for diclofenac. We also studied clofibric acid. Results after one month of operation revealed 30% elimination with no sign of adaptation by the biomass. Also described are degradation products of diclofenac, which we were able to identify because of the similarity of their mass spectra with those in the NIST library and by comparing the retention times of different compounds. Although the structures of these compounds were confirmed with a high probability (99%), we still need to compare the fragmentation of authentic compounds with degradation products formed under our experimental conditions. Degradation products of ibuprofen, naproxen, ketoprofen, and clofibric acid were found but these must be identified by use of high-resolution mass spectrometry and analysis of authentic compounds.     

Determination of dissolved sulphides in waste water samples by flow-through stripping chronopotentiometry with a macroporous mercury-film electrode

Sulphides in water samples were determined by stripping chronopotentiometry in a computer controlled flow system with a flow-through electrochemical cell. The working electrode was a porous glassy carbon electrode coated with Nafion and mercury. The sample was diluted with 0.1 mol L⁻¹ NaOH and analysed. Sulphides in the sample were collected in the porous electrode as mercury sulphide and then stripped by a current of −500 μA. The limit of detection was found to be 1.6 μg L⁻¹ and 0.5 μg L⁻¹ for 1 mL and 5 mL of preconcentrated sample, respectively. The linear range for 1 mL sample was found to be 5-400 μg L⁻¹. The repeatability and reproducibility was found to be 2.6% and 4.8%, respectively. The method was applied to analyses of waste water samples from a tannery.